From 4cac0f22be4cc65d70f4a0560b971d7bf283b78b Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Fri, 25 Jul 2014 21:12:22 -0500 Subject: [PATCH] hwpack: omap4-panda*: enable conf_smart_uboot (hdmi port works) Signed-off-by: Robert Nelson --- hwpack/omap4-panda-a4.conf | 43 ++++------------------------------- hwpack/omap4-panda-es-b3.conf | 30 ++++++++++++++++++++++++ hwpack/omap4-panda-es.conf | 43 ++++------------------------------- hwpack/omap4-panda.conf | 43 ++++------------------------------- 4 files changed, 42 insertions(+), 117 deletions(-) create mode 100644 hwpack/omap4-panda-es-b3.conf diff --git a/hwpack/omap4-panda-a4.conf b/hwpack/omap4-panda-a4.conf index 3bf57e3..838265c 100644 --- a/hwpack/omap4-panda-a4.conf +++ b/hwpack/omap4-panda-a4.conf @@ -8,58 +8,23 @@ conf_bl_listfile="bootloader-ng" #Bootloader Partition: conf_boot_fstype="fat" - bootloader_location="fatfs_boot" spl_name="MLO" boot_name="u-boot.img" #Bootloader: u-boot features: - -#CONFIG_CMD_BOOTZ -#bootz & zImage -conf_uboot_CONFIG_CMD_BOOTZ=1 - -#CONFIG_SUPPORT_RAW_INITRD -#allows booting un-mkimage wrapped initrds -conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1 - -#CONFIG_CMD_FS_GENERIC -#allows using "load" over "fatload"/"ext2load" -conf_uboot_CONFIG_CMD_FS_GENERIC=1 - -#uenvcmd avaiable? -conf_uboot_use_uenvcmd=1 -#conf_uboot_no_uenvcmd="loaduimage" - -#can the bootloader auto detect the device: (*.dtb)? -#uboot_fdt_auto_detection=1 - -#with mainline u-boot, the variable for the *.dtb file can vary -#uboot_fdt_variable_name="fdt_file" +conf_smart_uboot="enable" #Kernel: #https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7 kernel_subarch="armv7" kernel_repo="STABLE" #kernel_repo="TESTING" - +dtb="omap4-panda-a4.dtb" usbnet_mem="32768" - -conf_swapsize_mb="2048" - -#Kernel: Bootloader Settings: -conf_zreladdr="0x80008000" -conf_loadaddr="0x82000000" -conf_fdtaddr="0x88000000" -conf_initrdaddr="0x88080000" -conf_fdtfile="omap4-panda-a4.dtb" need_ti_connectivity_firmware=1 -SYSTEM="video" - SERIAL="ttyO2" SERIAL_CONSOLE="${SERIAL},115200n8" - -di_kms_mode=enable -drm_device_identifier="DVI-D-1" -di_serial_mode=enable +#drm_device_identifier="DVI-D-1" +#drm_device_identifier="HDMI-A-1" diff --git a/hwpack/omap4-panda-es-b3.conf b/hwpack/omap4-panda-es-b3.conf new file mode 100644 index 0000000..c922d9f --- /dev/null +++ b/hwpack/omap4-panda-es-b3.conf @@ -0,0 +1,30 @@ +#!/bin/bash +# --dtb omap4-panda-es-b3 (PandaBoard ES Rev B3:supported) + +#Bootloader: +conf_board="omap4_panda" +conf_bl_http="https://rcn-ee.net/deb/tools/latest" +conf_bl_listfile="bootloader-ng" + +#Bootloader Partition: +conf_boot_fstype="fat" +bootloader_location="fatfs_boot" +spl_name="MLO" +boot_name="u-boot.img" + +#Bootloader: u-boot features: +conf_smart_uboot="enable" + +#Kernel: +#https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7 +kernel_subarch="armv7" +kernel_repo="STABLE" +#kernel_repo="TESTING" +dtb="omap4-panda-es-b3.dtb" +usbnet_mem="32768" +need_ti_connectivity_firmware=1 + +SERIAL="ttyO2" +SERIAL_CONSOLE="${SERIAL},115200n8" +#drm_device_identifier="DVI-D-1" +#drm_device_identifier="HDMI-A-1" diff --git a/hwpack/omap4-panda-es.conf b/hwpack/omap4-panda-es.conf index a9b7b59..e3368c5 100644 --- a/hwpack/omap4-panda-es.conf +++ b/hwpack/omap4-panda-es.conf @@ -8,58 +8,23 @@ conf_bl_listfile="bootloader-ng" #Bootloader Partition: conf_boot_fstype="fat" - bootloader_location="fatfs_boot" spl_name="MLO" boot_name="u-boot.img" #Bootloader: u-boot features: - -#CONFIG_CMD_BOOTZ -#bootz & zImage -conf_uboot_CONFIG_CMD_BOOTZ=1 - -#CONFIG_SUPPORT_RAW_INITRD -#allows booting un-mkimage wrapped initrds -conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1 - -#CONFIG_CMD_FS_GENERIC -#allows using "load" over "fatload"/"ext2load" -conf_uboot_CONFIG_CMD_FS_GENERIC=1 - -#uenvcmd avaiable? -conf_uboot_use_uenvcmd=1 -#conf_uboot_no_uenvcmd="loaduimage" - -#can the bootloader auto detect the device: (*.dtb)? -#uboot_fdt_auto_detection=1 - -#with mainline u-boot, the variable for the *.dtb file can vary -#uboot_fdt_variable_name="fdt_file" +conf_smart_uboot="enable" #Kernel: #https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7 kernel_subarch="armv7" kernel_repo="STABLE" #kernel_repo="TESTING" - +dtb="omap4-panda-es.dtb" usbnet_mem="32768" - -conf_swapsize_mb="2048" - -#Kernel: Bootloader Settings: -conf_zreladdr="0x80008000" -conf_loadaddr="0x82000000" -conf_fdtaddr="0x88000000" -conf_initrdaddr="0x88080000" -conf_fdtfile="omap4-panda-es.dtb" need_ti_connectivity_firmware=1 -SYSTEM="video" - SERIAL="ttyO2" SERIAL_CONSOLE="${SERIAL},115200n8" - -di_kms_mode=enable -drm_device_identifier="DVI-D-1" -di_serial_mode=enable +#drm_device_identifier="DVI-D-1" +#drm_device_identifier="HDMI-A-1" diff --git a/hwpack/omap4-panda.conf b/hwpack/omap4-panda.conf index 2efc1fe..19d9b73 100644 --- a/hwpack/omap4-panda.conf +++ b/hwpack/omap4-panda.conf @@ -8,58 +8,23 @@ conf_bl_listfile="bootloader-ng" #Bootloader Partition: conf_boot_fstype="fat" - bootloader_location="fatfs_boot" spl_name="MLO" boot_name="u-boot.img" #Bootloader: u-boot features: - -#CONFIG_CMD_BOOTZ -#bootz & zImage -conf_uboot_CONFIG_CMD_BOOTZ=1 - -#CONFIG_SUPPORT_RAW_INITRD -#allows booting un-mkimage wrapped initrds -conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1 - -#CONFIG_CMD_FS_GENERIC -#allows using "load" over "fatload"/"ext2load" -conf_uboot_CONFIG_CMD_FS_GENERIC=1 - -#uenvcmd avaiable? -conf_uboot_use_uenvcmd=1 -#conf_uboot_no_uenvcmd="loaduimage" - -#can the bootloader auto detect the device: (*.dtb)? -#uboot_fdt_auto_detection=1 - -#with mainline u-boot, the variable for the *.dtb file can vary -#uboot_fdt_variable_name="fdt_file" +conf_smart_uboot="enable" #Kernel: #https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7 kernel_subarch="armv7" kernel_repo="STABLE" #kernel_repo="TESTING" - +dtb="omap4-panda.dtb" usbnet_mem="32768" - -conf_swapsize_mb="2048" - -#Kernel: Bootloader Settings: -conf_zreladdr="0x80008000" -conf_loadaddr="0x82000000" -conf_fdtaddr="0x88000000" -conf_initrdaddr="0x88080000" -conf_fdtfile="omap4-panda.dtb" need_ti_connectivity_firmware=1 -SYSTEM="video" - SERIAL="ttyO2" SERIAL_CONSOLE="${SERIAL},115200n8" - -di_kms_mode=enable -drm_device_identifier="DVI-D-1" -di_serial_mode=enable +#drm_device_identifier="DVI-D-1" +#drm_device_identifier="HDMI-A-1"