From 52f3b95a58064bd2fdc698d0fce6d3554e8999ff Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Thu, 24 Jul 2014 23:06:41 -0500 Subject: [PATCH] hwpack: wandboard-dual: enable conf_smart_uboot Signed-off-by: Robert Nelson --- hwpack/wandboard-dual.conf | 36 ++---------------------------------- 1 file changed, 2 insertions(+), 34 deletions(-) diff --git a/hwpack/wandboard-dual.conf b/hwpack/wandboard-dual.conf index 133a244..8458081 100644 --- a/hwpack/wandboard-dual.conf +++ b/hwpack/wandboard-dual.conf @@ -16,50 +16,18 @@ unset spl_name boot_name="u-boot.imx" #Bootloader: u-boot features: - -#CONFIG_CMD_BOOTZ -#bootz & zImage -conf_uboot_CONFIG_CMD_BOOTZ=1 - -#CONFIG_SUPPORT_RAW_INITRD -#allows booting un-mkimage wrapped initrds -conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1 - -#CONFIG_CMD_FS_GENERIC -#allows using "load" over "fatload"/"ext2load" -conf_uboot_CONFIG_CMD_FS_GENERIC=1 - -#uenvcmd avaiable? -conf_uboot_use_uenvcmd=1 -#conf_uboot_no_uenvcmd="loaduimage" - -#can the bootloader auto detect the device: (*.dtb)? -uboot_fdt_auto_detection=1 - -#with mainline u-boot, the variable for the *.dtb file can vary -uboot_fdt_variable_name="fdt_file" +conf_smart_uboot="enable" #Kernel: #https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7 kernel_subarch="armv7" kernel_repo="STABLE" #kernel_repo="TESTING" - usbnet_mem= - -#Kernel: Bootloader Settings: -conf_zreladdr="0x10008000" -conf_loadaddr="0x12000000" -conf_fdtaddr="0x11000000" -#initrdaddr = loadaddr + 10(mb) * 10 0000 = 0x12A0 0000 (10MB) -conf_initrdaddr="0x12A00000" need_wandboard_firmware=1 -SYSTEM="video" - SERIAL="ttymxc0" SERIAL_CONSOLE="${SERIAL},115200n8" -di_kms_mode=enable -drm_device_identifier="HDMI-A-1" drm_read_edid_broken="enable" +drm_device_identifier="HDMI-A-1"