From 8bf7ae0259cf77097048c9362c6ed2c5b9f6e442 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Mon, 28 Jul 2014 12:48:40 -0500 Subject: [PATCH] hwpack: omap3-beagle* enable conf_smart_uboot Signed-off-by: Robert Nelson --- hwpack/omap3-beagle-xm.conf | 38 +++---------------------------------- hwpack/omap3-beagle.conf | 37 +++--------------------------------- 2 files changed, 6 insertions(+), 69 deletions(-) diff --git a/hwpack/omap3-beagle-xm.conf b/hwpack/omap3-beagle-xm.conf index 879300f..20340fe 100644 --- a/hwpack/omap3-beagle-xm.conf +++ b/hwpack/omap3-beagle-xm.conf @@ -8,54 +8,22 @@ conf_bl_listfile="bootloader-ng" #Bootloader Partition: conf_boot_fstype="fat" - bootloader_location="fatfs_boot" spl_name="MLO" boot_name="u-boot.img" #Bootloader: u-boot features: - -#CONFIG_CMD_BOOTZ -#bootz & zImage -conf_uboot_CONFIG_CMD_BOOTZ=1 - -#CONFIG_SUPPORT_RAW_INITRD -#allows booting un-mkimage wrapped initrds -conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1 - -#CONFIG_CMD_FS_GENERIC -#allows using "load" over "fatload"/"ext2load" -conf_uboot_CONFIG_CMD_FS_GENERIC=1 - -#uenvcmd avaiable? -conf_uboot_use_uenvcmd=1 -#conf_uboot_no_uenvcmd="loaduimage" - -#can the bootloader auto detect the device: (*.dtb)? -uboot_fdt_auto_detection=1 - -#with mainline u-boot, the variable for the *.dtb file can vary -#uboot_fdt_variable_name="fdt_file" +conf_smart_uboot="enable" #Kernel: #https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7 kernel_subarch="armv7" kernel_repo="STABLE" #kernel_repo="TESTING" - +dtb= usbnet_mem="16384" - -#Kernel: Bootloader Settings: -conf_zreladdr="0x80008000" -conf_loadaddr="0x82000000" -conf_fdtaddr="0x88000000" -conf_initrdaddr="0x88080000" -need_ti_connectivity_firmware=1 - -SYSTEM="video" +#need_ti_connectivity_firmware=1 SERIAL="ttyO2" SERIAL_CONSOLE="${SERIAL},115200n8" - -di_kms_mode=enable drm_device_identifier="DVI-D-1" diff --git a/hwpack/omap3-beagle.conf b/hwpack/omap3-beagle.conf index 900deeb..f1c883e 100644 --- a/hwpack/omap3-beagle.conf +++ b/hwpack/omap3-beagle.conf @@ -8,55 +8,24 @@ conf_bl_listfile="bootloader-ng" #Bootloader Partition: conf_boot_fstype="fat" - bootloader_location="fatfs_boot" spl_name="MLO" boot_name="u-boot.img" #Bootloader: u-boot features: - -#CONFIG_CMD_BOOTZ -#bootz & zImage -conf_uboot_CONFIG_CMD_BOOTZ=1 - -#CONFIG_SUPPORT_RAW_INITRD -#allows booting un-mkimage wrapped initrds -conf_uboot_CONFIG_SUPPORT_RAW_INITRD=1 - -#CONFIG_CMD_FS_GENERIC -#allows using "load" over "fatload"/"ext2load" -conf_uboot_CONFIG_CMD_FS_GENERIC=1 - -#uenvcmd avaiable? -conf_uboot_use_uenvcmd=1 -#conf_uboot_no_uenvcmd="loaduimage" - -#can the bootloader auto detect the device: (*.dtb)? -uboot_fdt_auto_detection=1 - -#with mainline u-boot, the variable for the *.dtb file can vary -#uboot_fdt_variable_name="fdt_file" +conf_smart_uboot="enable" #Kernel: #https://rcn-ee.net/deb/wheezy-armhf/LATEST-armv7 kernel_subarch="armv7" kernel_repo="STABLE" #kernel_repo="TESTING" - +dtb= usbnet_mem="8192" - -#Kernel: Bootloader Settings: -conf_zreladdr="0x80008000" -conf_loadaddr="0x82000000" -conf_fdtaddr="0x88000000" -conf_initrdaddr="0x88080000" #need_ti_connectivity_firmware=1 -SYSTEM="video-musb" - SERIAL="ttyO2" SERIAL_CONSOLE="${SERIAL},115200n8" - -di_kms_mode=enable drm_device_identifier="DVI-D-1" di_serial_mode=enable +cmdline="musb_hdrc.fifo_mode=5"